1.Clean the surfack,crevice,or gap.

2.Cut nozzle to yield desired bead size.

3.Pierce inner bottle seal to release the sealant.Mount the nozzlein place.

4.Apply the sealant on the area.

5.Drag the nozzle firmly along the crevice,seam,or surface togenerously fill in thesealant.

6.Scrape any excess sealant using a window scraper or anyflat-tipped object.

7Wait and leave the sealant to set and dry for 30-60 minutebefore exposing it towater or any external force.

8.To maintain a better shelf life quality leave a small Sealantresidue on the nozzleedge,the top edge residue.will make acover layer on the nozzle edge and helps tomaintain the liquidsapect for next use